1575
FRD
tissue, toilet paper, napkin paper, Toilet Paper Jumbo Roll
1575mm
3-4 tonelada bawat araw
60-80m/min
2100mm
Toilet paper, tissue, facial tissue paper, napkin paper...
1575 mm
13-25gsm
Bilis ng AC inverter, drive ng seksyon.
Mga teknikal na parameter ng 1575mm toilet paper making machinery:
1. Output paper style: toilet paper, tissue paper, toilet tissue paper, panyo, napkin paper
2. Raw material: waste paper, wheat straw, wood pulp, cotton straw, sugan cane bagasse, kawayan
3. Output na timbang ng papel: 13-30g/m2;
4.net na lapad ng papel: 1575mm
5. Lapad ng tansong silindro: 1900mm
6. Kapasidad: 3-4T/D
7.Working bilis:60-80m/min
8. Rail gauge: 21000mm
9. Drive way: AC inverter speed, section drive.
Frame ng pangunahing bahagi ng 1575mm toilet paper making machinery:
1. Bahagi ng silindro: 1000mm×1900mm wire mold (1pc), 380mm×1500mm couch roll(1pc), rubber hardness HSD 38±2.
2. Bahagi ng dryer: 2000mm×1900mm dryer can (1pc), 350mm×1500mm touch roll, mechanical press device. Tigas ng goma HSD 90±2.
3. Paikot-ikot na bahagi: 1092mm Rewinding machine, perforating machine at Paper cutting machine.
Lahat ng Kagamitan ng 1575mm toilet paper making machinery:
HINDI. |
Kagamitan |
dami (set) |
1 |
1575mm Single-cylinder Single-wire tissue paper making machine |
1 |
2 |
double layer dryer can Naubos ang hood |
1 |
3 |
Model-33 Roots vacuum pump |
1 |
4 |
Suction box |
1 |
5 |
0.9m2Mataas na dalas ng vibration screen |
1 |
6 |
Modelo 380double disc Refiner |
1 |
7 |
35m3pulp washer |
2 |
8 |
Φ700mmThruster |
2 |
9 |
distorbo |
1 |
10 |
4 pulgadang pulp pump |
4 |
11 |
1575mm rewinding at perforating machine |
1 |
12 |
1575mm paper cutting machine |
1 |
13 |
2 toneladang boiler (magsunog ng karbon) |
1 |
Accessory na de-koryenteng motor:
HINDI. |
pangalan ng kagamitan |
kapangyarihan(kw) |
grado |
dami (set) |
1 |
1575mm toilet paper machine |
11 |
adjustable na bilis ng motor |
1 |
2 |
1575mm winding machine |
3 |
4 |
1 |
3 |
modelo 33vacuum pump |
5.5 |
4 |
1 |
4 |
0.9m2high frequency vibration screen |
3 |
4 |
1 |
5 |
modelong 380double disc refiner |
37 |
4 |
1 |
6 |
panghugas ng pulp |
3 |
4 |
2 |
7 |
Φ700mm thruster |
11 |
6 |
2 |
8 |
4inch pulp pump |
5 |
4 |
4 |
9 |
1575mmrewinding at perforating machine |
3 |
adjustable na bilis ng motor |
1 |
10 |
1575mm paper cutting machine |
2.2 |
4 |
1 |
11 |
2 toneladang boiler (magsunog ng karbon) |
5.5 |
4 |
2 |
Hilaw na Materyal
Pag-iimpake at pagpapadala
1. Inayos ang lahat ng mga movable parts na may plastic films.
2. Polystyrene foam plate na nakabalot.
3. Nakabalot ng masikip na plastic na pelikula ng ilang bilog.
4. Fixed machine sa fumigated plywood pallet na may wire na bakal.
5. Binalot ng kahoy na tabla sa paligid at ipinako.
